Specifications
|
Input Specifications |
|
| 3Φ AC Input Voltage
3Φ, 3-wire + ground Available on all models
|
208 Vac (operating range 187 to 229 Vac) |
| 240 Vac (operating range 216 to 264 Vac) | |
| 380 Vac (operating range 342 to 440 Vac) | |
| 415 Vac (operating range 373 to 456 Vac) | |
| 440 Vac (operating range 396 to 484 Vac) | |
| 480 Vac (operating range 432 to 528 Vac) | |
| Input Frequency | 50 to 60 Hz |
| Power Factor
|
> 0.92 at maximum power |
| AC Input Isolation | ±2500 Vac, maximum input voltage to ground |
|
Output Specification |
|
| Voltage Ripple | Model specific. Refer to chart of available models. |
| Line Regulation
|
Voltage mode: ± 0.004% of full scale
Current mode: ± 0.02% of full scale
|
| Load Regulation | Voltage mode: ± 0.01% of full scale
Current mode: ± 0.04% of full scale
|
| Load Transient Response | 2 ms to recover within ±1% of regulated output with a 50% to 100% or 100% to 50% step load change |
| Stability | ± 0.10% for 8 hrs. after 30 min. warm-up |
| Efficiency
|
86% to 88%
Model specific. Refer to chart of available models
|
| Maximum Slew Rate
Standard Models
|
100 ms for an output voltage change from 0 to 63%
100 ms for an output current change from 0 to 63%
|
| Maximum Slew Rate
Models with High Slew Rate (+HS) Option
|
4 ms for an output voltage change from 0 to 63%
8 ms for an output current change from 0 to 63%
|
| Bandwidth
Standard Models
|
3 Hz with remote analog voltage programming
2 Hz with remote analog current programming
|
| Bandwidth
Models with High Slew Rate (+HS) Option
|
60 Hz with remote analog voltage programming
45 Hz with remote analog current programming
|
| DC Output Isolation
Models Rated ≤1000 Vdc
|
±1000 Vdc, maximum output voltage to ground |
| DC Output Isolation
Models Rated >1000 Vdc or Models with +ISO Option
|
±(2000 Vdc + Vo/2), maximum output voltage to ground where Vo is the maximum output voltage of the power supply |
| Control Specifications | |
| Voltage Programming Accuracy | ± 0.075% of max rated voltage |
| Over Voltage Trip Programming Accuracy | ± 0.075% of max rated voltage |
| Current Programming Accuracy | ± 0.075% of max rated current |
| Over Current Trip Programming Accuracy
|
± 0.075% of max rated current |
| Voltage Readback Accuracy | ± 0.2% of max rated voltage |
| Current Readback Accuracy | ± 0.2% of max rated current |
| Load Regulation | Voltage mode: ± 0.01% of full scale
Current mode: ± 0.04% of full scale
|
| Computer Command Protocol | Standard Commands for Programmable Instruments (SCPI) |
| External User I/O Port
Analog and Digital Programming
|
37-pin D-sub DC-37, female
Referenced to Earth ground; isolated from power supply output
|
| Analog Programming and Monitoring Levels
|
0-10 Vdc |
| Analog Output Impedances | Voltage output monitoring: 100 Ω
Current output monitoring: 100 Ω +10V reference: 1 Ω
|
| Digital Programming and Monitoring Limits | Input: 0 to 5 Vdc, 10 kΩ input impedance
Output: 0 to 5 Vdc, 5 mA drive capacity
|
| Remote Sense Limits (Wired) | 3% maximum voltage drop from output to load |
| Physical Specifications | |
| Size and Weight
30 kW Models
|
Floor-standing cabinet with casters
31.5″ H x 24″ W x 31.5″ D (80.0 x 55.6 x 80.0 cm) 280 lbs (127.01 kg)
|
| Size and Weight
45 kW Models
|
Floor-standing cabinet with casters
51″ H x 24″ W x 31.5″ D (129.5 x 61.0 x 80.0 cm) 395 lbs (179.17 kg)
|
| Size and Weight
60 kW Models
|
Floor-standing cabinet with casters
51″ H x 24″ W x 31.5″ D (129.5 x 61.0 x 80.0 cm) 510 lbs (231.33 kg)
|
| Size and Weight
75 kW Models
|
Floor-standing cabinet with casters
51″ H x 24″ W x 31.5″ D (129.5 x 61.0 x 80.0 cm) 645 lbs (292.57 kg)
|
| Environment Specifications | |
| Ambient Operating Temperature | 0°C to 50°C |
| Storage Temperature
|
-25°C to +85°C |
| Humidity | Relative humidity up to 95% non-condensing |
| Temperature Coefficient | 0.04%/°C of maximum output voltage
0.06%/°C of maximum output current
|
| Air Cooling
Standard
|
Front air intake, top exhaust |
| Water Cooling
With +WC Option
|
25°C maximum inlet temperature
3.0 GPM minimum flow rate for 30 kW units 4.5 GPM minimum flow rate for 45-75 kW units 80 PSI maximum pressure 1/2” NPT male pipe size
|
|
Regulatory Compliance |
|
| EMC | Complies with European EMC Directive for test and measurement products |
| Safety | Complies with EN61010-1 |
| CE Mark | Yes |
| RoHS Compliant | Yes |
