MEP-8TL Manual Electric Pressure

SYNEO offers a tiered range of servo electric presses designed to insert compliant pin connectors into printed circuit boards. Each SYNEO press is programmed and operated via a dedicated PC, that can be directly programmed or can also utilize a remote programming workstation that supports multi-machine configurations.


SYNEO’s high-resolution press position feedback (0.001mm true Z-Axis resolution) closely monitors pressing force (even below 1lb) in real time, allowing an operator to be immediately aware of a problem such as a bent pin, an oversized PCB hole, or an incorrectly positioned connector during the press cycle. Instantaneous feedback for board problems improves resolution in quality assurance, improving yield metrics while reducing operating costs.

All press programs, connectors, board layouts, press profiles, and tool part numbers can be stored, so future applications can be easily adapted from existing programs and transferred between machines in multi-machine arrangements. All these functions improve the versatility of the work cell and help prevent future careless errors by allowing users to utilize previously validated information.


  • Opening 91 CM x 91 CM deep (36″ x 36″)
  • PCB 76 CM x 91 CM (30″ x 36″)
  • All electric press, hi-frame design
  • 8-ton capacity
  • Windows PC control with touchscreen monitor, keyboard, mouse
  • Full force available throughout travel
  • Head is manually moveable throughout opening
  • Flat rock press head 305 MM x 38 MM (12″ x 1.5″)
  • Teflon Hard Coat aluminum table
  • Two-hand safety actuation
  • Press to force or height with error detection
  • Dynamic force adjustment using PAST, PAR or FAT
  • Fully automatic setup, no manual adjustments
  • Board thickness measurement
  • 220 VAC 1 phase, 20 Amps, 50/60 Hz
  • Air 80 psi for air table & sliding head air bearing
  • 2,300 lbs. approx. weight
  • Shipping : 1 pallet, 190 CM x 170 CM x 196 CM high, 1900 lbs